Cleaning your Brinsea Eco Glow Brooder

Ever since I first saw the Brinsea Eco Glow Brooders I’ve wondered about how to clean them and just how dirty they would get.  It is true that the chickens, once they are old enough to come out from underneath them, love to sit on top of them – especially during the day.  So after hatching my latest batch of chickens I took photos of the Eco Glow as I clean it (the whole process took less than 15mins – probably extended slightly by me stopping to take the photos :)   The nine chickens had used the Eco Glow 20 for over 6 weeks when I removed it for cleaning (6th Nov 2015 till the 17th Dec 2015 to be exact!).  So here are the cute little fluffy chickens under the Eco Glow.20151108_174535

And then as they got bigger on top of it … 20151207_094118   So this is how it looked on the 17th of Dec.20151217_122619

So step 1 was scrap the solid waste material off the Eco Glow – the photo shows the scrap of wood I found in the garden to do this with.

20151217_122857

As you can see this made a big difference to the amount of poo on top of the Eco Glow.  Next I found a damp cloth to put on the Eco Glow to soak off the stuck poo.  The photo below shows the Eco Glow after a 5min  ‘soak’ with a damp cloth – please note I said damp not dripping wet – and a quick wipe.  The Eco Glow does have electronics inside that does not want to get wet!

20151217_123129

The last two stages of the process were a more careful clean with the same damp cloth around the unit and lastly a ‘sun bathe’ to make sure it was well dried and ‘UV sterilized’.  I’m a firm believer in the benefits of sunlight for cleaning.  Saying that I didn’t left it out in blistering sun for hours – about 30mins on a warm day, not a day like today where the temp is 40C+. 20151217_131511

So the end result is that the Eco Glow looks just a clean as it did when it started.

To find Brooders and ICU’s on our website.

20151217_131520